Loading The Paper - Kodak 7000 User Manual

Setting Up the Printer

Loading the Paper

Paper
door
1-8
Push the right side of the take-up spool onto the rear spool holder on the
7.
right.
Insert the left side of the take-up spool onto the spool holder on the left.
8.
Rotate the take-up spool until it locks into place.
9.
If there is any slack in the ribbon, remove it by turning the supply spool.
10.
Slack in the ribbon can cause a paper jam.
IMPORTANT:
Close the top cover.
11.
Make sure you have a KODAK Print Kit 6R (sold separately) available. This kit
contains the correct paper for your printer (see
page A-2).
Make sure the printer power is on ( | ).
1.
Open the paper door. If you are replacing the paper, remove the used
2.
paper roll.
Remove the plastic from the new paper roll.
3.
Do not remove the label from the paper roll until you have
IMPORTANT:
successfully loaded the paper in the printer.
"Printer Supplies" on