Full Screen Synchronous Representation Settings; Full Screen Synchronous Representation - Barco Galaxy NH-12 User Manual

4. Use ↑ or ↓ to select Stereo Mode
5. Press → to pull down the menu
6. Use ↓ or ↑ to select Auto, Always or Infitec
Image 7-141
7. Press ENTER
A white bullet shows the active setting
7.9.3

Full screen synchronous representation settings

Overview
•

Full screen synchronous representation

• Asynchronous frequency
7.9.3.1 Full screen synchronous representation
What can be done?
In full screen, the display can be driven in synchronous or asynchronous mode. In the synchronous mode, the display will be
refreshed at the same vertical frequency as the displayed source.
In the asynchronous mode, the display will be refreshed at a fixed vertical frequency depending on the OSD setting, instead of the
vertical frequency of the displayed source.
The maximal vertical refresh rate of the display is 120Hz.
Fixed vertical refresh rate during asynchronous mode:
50 Hz or 60 Hz if the projector is Galaxy NW-7 and 60 Hz if the projector are (Galaxy) NW-12/NH-12, NW-12, iD
LH12, iCon NH-12.
Galaxy NW-7 has an extra step procedure which is described below !
If Full screen synchronous representation is disabled, smoothly moving images can show chopped motion!
R59770122 BARCO GALAXY NH-12 20/01/2015
7. Advanced
129