Active Infitec; Communication; Network Connections - Barco Galaxy NH-12 User Manual

• stereo input settings in the Image menu : to match the Image generator to the projector. "Input stereo sync", page 75
• stereo output & system settings in the Display setup menu : to match the projector to the emitters ,..."Stereo System Setup",
page 146
• stereo display settings in the Display setup menu : to decide how to display the video content. "Stereo display settings", page
126
Image Generator
Image 4-26
Stereo settings
See the Display setup menu (for the stereo output and system settings) and the Image menu (for the stereo
input settings)
4.5.12 Active Infitec
The Active Infitec
How to connect when using active Infitec
1. The input connection is done in the same way as described above but the stereo output signal is not required in this case since
Infitec TM stereo glasses are required instead (these glasses are passive i.e. not switched).

4.5.13 Communication

Overview
•

Network connections

• Network settings
• RS232 communication
4.5.13.1 Network connections
What can be done ?
The projector can be connected to a network allowing it to be accessed from any connected network device. The Ethernet connection
can be used to upload/download projector software and/or to set up communication (TCP-packets) with the projector. This network
can be a local area network or a small dedicated network
R59770122 BARCO GALAXY NH-12 20/01/2015
R / PR R / PR R / PR G / Y G / Y G / Y B / PB B / PB B / PB Hs / Cs Hs / Cs Hs / Cs Vs Vs Vs VIDEO VIDEO VIDEO VIDEO S-VIDEO S-VIDEO
IN1 IN1 IN1 IN2 IN2 IN2 IN1 IN1 IN1 IN2 IN2 IN2 IN1 IN1 IN1
L1 L1 L1 L2 L2 L2 L3 L3 L3
STEREO INPUT STEREO INPUT STEREO INPUT STEREO OUTPUT STEREO OUTPUT
RS 232 C RS 232 C RS 232 C DVI DVI DVI R.C. R.C. R.C.
Stereo Output & System settings
DESKTOP INPUT DESKTOP INPUT DESKTOP INPUT
IR Emitter
Active Glasses
TM
feature is optional: a software key is needed to activate it.
TM
Stereo Display settings
IR Emitter
stereo ?
TM
4. Installation
5
31