Matching Infitec A And Infitec B - Barco Galaxy NH-12 User Manual

7. Advanced
Image 7-156
The CPU of the Master now reads the native (i.e. measured) color triangle of each Host, calculates a common triangle and writes
the coordinates of the common triangle as desired values in the selected DynaColor™ set and of itself.
Make sure to link (i.e. match) the Dynacolor sets Infitec A and Infitec B in case of single channel projector
(operating in active Infitec stereo mode) so as to obtain a common color gamut for the left and right (eye)
image. See "Matching Infitec A and Infitec B", page 140.
7.9.7.5 Matching Infitec A and Infitec B
What to be done?
In a single channel display system running in Active Infitec mode, the color gamut of the left eye image and the right eye image must
be matched.
Matching Infitec A and Infitec B
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
3. Press ↓ to Pull down the Display setup menu
4. Use ↑ or ↓ to select Dynacolor
5. Press → to open the menu
6. Use ↑ or ↓ to select Matching Infitec A/B
140 R59770122 BARCO GALAXY NH-12 20/01/2015