7.8.5
Desktop
What can be done ?
An external source can be connected to the projector in order to be used as desktop i.e. as background for the connected sources.
The desktop source which is in general a PC can then be used to manage the projector sources which act as source windows on
top of the desktop image. An Ethernet link between the desktop PC and the projector allows the control of the source windows.
How to enable the desktop ?
1. Press MENU to activate the Tool bar
2. Press → to select General
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Desktop
5. Press → to open the menu
6. Use ↑ or ↓ to select ON
Image 7-133
7. Press ENTER
The desktop is displayed if the desktop PC is connected (see connections)
Using Desktop makes only sense when using the Barco Desktop integration software. The Desktop integra-
tion software is covered in the Desktop integration User Guide.
7.9
Display setup
Overview
•
Textbox
•
Stereo display settings
•
Full screen synchronous representation settings
•
Menu bar position
•
Status bar position
•
Slider box position
•
Dynacolor
•
Stereo System Setup
•
Soft edge
•
AutoImage Setup
•
True motion reproduction (TMR)
7.9.1
Textbox
What can be done ?
The Text box function allows to choose whether the different text boxes are displayed or not.
How to enable/disable the Textbox ?
1. Press MENU to activate the Tool bar
2. Press → to select the Display setup item
R59770122 BARCO GALAXY NH-12 20/01/2015
7. Advanced
125