Removing Rear Wheel - BMW S 1000 RR Rider's Manual

9
124
Install screws 2 on left and
right with appropriate torque.
Radial brake calipers on
the axle adapter
z
28 lb/ft (38 Nm)
with BMW Motorrad Race
ABS OE
Insert ABS sensor into hole
and install screw 1.
Remove adhesive tape from
wheel rim.
Press handbrake lever firmly
a number of times until resis-
tance point is felt.

Removing rear wheel

Place motorcycle on an auxil-
iary stand; BMW Motorrad rec-
ommends BMW Motorrad rear
wheel stand.
Installing the auxiliary stand on
the rear wheel ( 129).
Support the rear wheel, e.g.,
with a wooden block, so that
it cannot fall down after the
quick-release axle is removed.
Remove axle nut 1 with
washer.
Loosen lock nuts 3 on left and
right.
Loosen adjusting screws 2 on
left and right.
Remove adjusting plate 4 and
slide axle as far as possible to-
ward inside.