BMW S 1000 RR Rider's Manual page 56

4
54
Unlock seat lock 1 with the
vehicle ignition key.
Lift passenger seat at rear,
z
then remove by pulling back
and upward.
Remove ignition key and lay
passenger seat on a clean sur-
face with the upholstered side
on the bottom.
Installing passenger seat
Mount passenger seat in
mounts 2 on left and right.
Press the rear seat forward
slightly then fold it down.
Lock seat lock with ignition
key.
Removing driver's seat
Press cover of driver's seat
above screws 1 forward some-
what and hold in place.
Remove screws.
Push the driver's seat forward,
lift it at the rear and remove it.
When doing so, make sure that
the paneling is not damaged by
the screws.
Lay the driver's seat on a clean
surface with the upholstered
side down.