5
68
Undo the screws 1 and remove
z
the trim panel at the lower fork
bridge.
The motorcycle can tip
away to the side and fall
over.
Secure the motorcycle against
tipping away to the side.
Push motorcycle onto transport
surface, and do not place on
side stand.
Components can be dam-
aged.
Do not pinch components, e.g.
brake lines or wiring harnesses.
Lay straps at front over lower
fork bridge on both sides.
Tension straps downward.
Fasten straps at rear on both
sides on passenger footrests
and tighten them.
Tension all straps evenly; the
motorcycle should be pulled
down against its springs with
the suspension compressed as
much as possible.