BMW S 1000 RR Rider's Manual page 136

9
134
Push the retainer 2 downward
(using a screwdriver if nec-
essary) and pull the socket 3
from the headlight housing.
z
Remove bulb 4 from the
socket.
Replace defective bulb.
Bulb for parking light
W5W / 12 V / 5 W
To prevent contaminants from
being deposited on the new
bulb's glass surface, always use
a clean, dry cloth to hold it.
Insert bulb 4 into the socket.
Insert socket 3 in headlight
housing, continuing to apply
pressure until the retainer 2
engages.
Install the cover.
Replacing front and rear
turn indicator bulbs
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.