BMW S 1000 RR Rider's Manual page 52

4
Compression stage, ba-
sic setting, front
50
Position 8 (sporty setting
with driver 187 lbs (85 kg))
Make sure that the same val-
ues are set on the left and
right.
Rebound-stage damping
on front wheel
z
Adjust rebound-stage damping
with adjusting screws 1 on left
and right-hand fork leg.
To increase damping: turn ad-
justing screw with tool on on-
board tool kit so that marking 2
points to a higher scale value.
To decrease damping: turn
adjusting screw with tool of on-
board tool kit so that marking 2
points to a lower scale value.
Rebound stage, basic
setting, front
Position 2 (comfortable
setting with driver 187 lbs
(85 kg))
Position 4 (normal setting
with driver 187 lbs (85 kg))
Rebound stage, basic
setting, front
Position 7 (sporty setting
with driver 187 lbs (85 kg))
Make sure that the same val-
ues are set on the left and
right.
Factory settings at front
wheel
Use the following specification
data to adjust to factory set-
tings.
Factory settings for
jounce/rebound at front
Position 4
Adjusting compression
damping (jounce) at rear
wheel
Make sure ground is level and
firm and park motorcycle.