BMW S 1000 RR Rider's Manual page 46

4
44
With the coding plug installed,
the riding mode
also offered in the selection
z
menu.
Install coding plug. (
Press button 1 repeatedly until
SLICK
4 is selection arrow appears before
desired setting.
45).
and assumes very good adhesion
values, as are usually found on
racetracks only. Corresponding
driving ability is also assumed.
Enable SLICK mode on race-
tracks only, and only with racing
tires.
When selecting the SLICK
mode, remember the restric-
tions on ABS control interven-
SLICK mode is designed
for racing tires (slick tires)
tion at the rear wheel (see the
chapter "Technology in detail").
When the motorcycle comes
to a stop, the selected riding
mode is activated after approx.
ten seconds.
The new riding mode is acti-
vated during operation under
the following conditions:
Brakes not engaged
Throttle turned all the way
back
Clutch disengaged
After the new riding mode is
activated, the selection menu
disappears.
The configured riding mode
with the corresponding adapta-
tions of the engine character-
istics, ABS and DTC is main-
tained, even after the ignition is
switched off.