BMW S 1000 RR Rider's Manual page 63

The indicator and warning lamps
go out.
The display reverts to the stan-
dard format.
Should one of the warning lamps
fail to appear:
If it was not possible to
switch on the warning
lights, possible malfunctions
cannot be indicated.
Watch all warning and indicator
lights on the display.
Have the malfunction corrected
as soon as possible at a spe-
cialist service facility, preferably
an authorized BMW Motorrad
retailer.
ABS self-diagnosis
with BMW Motorrad Race
OE
ABS
The readiness for operation of
the BMW Motorrad Race ABS
is checked by the self-diagnosis.
Self-diagnosis is performed au-
tomatically when you switch on
the ignition. To check the wheel
sensors, the motorcycle must be
driven a few yards.
Phase 1
Checking the diagnosable
system components while
stopped.
ABS warning lamp flashes.
Phase 2
Checking wheel sensors while
starting off.
ABS warning lamp flashes.
ABS self-diagnosis
completed
The ABS warning light goes
out.
If an ABS fault is indicated after
the ABS self-diagnosis is com-
pleted:
Continued driving is possible. It
must be noted that neither the
ABS nor the integral function is
available.
Have the malfunction corrected
as soon as possible by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
DTC self-diagnosis
with BMW Motorrad Race ABS
OE
and DTC
The readiness for operation
of the BMW Motorrad DTC is
checked by the self-diagnosis.
Self-diagnosis is performed
automatically when you switch on
the ignition.
5
61
z