Roll rear wheel further into
swing arm while simultaneously
pushing brake caliper carrier 10
toward the front.
Roll rear wheel as far forward
as possible and lay chain 7 on
sprocket.
Insert the right side shim 6 in
the swing arm with the travel
stop 12 pointing toward the
front.
Raise the rear wheel and in-
stall the quick-release axle 5
through the shim in the brake-
caliper support and the rear
wheel.
Ensure that the quick-release
axle seats securely against the
travel stop on the adjustment
plate.
Mount adjusting plate on left 4.
Install axle nut 1 with washer
but do not yet tighten down.
9
127
z