Table of Contents
Advertisement
c RGB OUT connector (D-sub
15-pin)
Connect to the RGB input of the
optional projector or display unit.
d HDMI OUT connector
Connect to the HDMI input of the
optional TV monitor.
e ISDN UNIT connector
Connect to the TERMINAL connector
on the optional PCSA-B384S or
PCSA-B768S ISDN Unit.
f AUX CONTROL connector (D-sub
9-pin)
Used for maintenance service.
g
I
(ground) terminal
Connect a ground wire.
h MIC (A1/A3) 1 (R)/2 (L) jacks
(minijack)
Connect to the PCS-A1 microphones
(supplied) or PCSA-A3 microphones
(optional). Power is supplied to the
microphones from the System.
i AUDIO OUT L/R jacks (phono
jack)
Connect to the audio inputs of the TV
monitor.
j REC OUT L/R connectors (phono
jack)
Used when recording the audio signals
to minute a communication. The mixed
sounds of the local and remote parties
are output from these connectors.
k
(LAN) connector
(100BASE-TX/10BASE-T, 8-pin
modular)
Used to connect via a LAN or a SIP.
Connect to a hub or a SIP server using
the category 5 cable.
l DC 19.5V jack
Connect the supplied AC Power
Adaptor.
PCSA-CG70/CG70P Camera
Unit (Supplied)
Front
2
3
4
Rear
Bottom
a Lens
b Remote sensor
Point the Remote Commander to the
sensor when operating this system.
Location and Function of Parts and Controls
1
TERMINAL
VISCA OUT
5 6
7
213
Advertisement
Table of Contents
