Timer High Priority; Timer Medium Priority; Transaction Timer; Transfer On Ringing - Siemens optiPoint 410 entry Administrator's Manual

Alphabetical Reference

Timer High Priority

Set the delay in seconds after the last high priority item change before sav-
ing the changes to the DLS.
•
•
! page 101

Timer Medium Priority

Set the delay in seconds after the last medium priority item change before
saving the changes to the DLS. Used in confjunction with the Medium Pri-
oity peg count threshold.
•
•
! page 101

Transaction timer

The Transaction Timer sets the amount of time that the phone will wait for
a response to any SIP request that it sends. The time value is in millisec-
onds and the user can enter any value between 3000 and 32000. The de-
fault value is 32000 milliseconds.
! page 65

Transfer on Ringing

If this function is active, a consultation can be transferred after you have
dialled the third participant's number, but before the third party has an-
swered the call.
! page 63

Unauthorised Logoff Trap

Determines wheter or not the phone sends an ! SNMP trap whenever
the DLS notifies the Phone of an unauthorised logoff attempt.
! page 101 or
224
Causes time out before saving high prioity user data.
Vaulue range: 0 to 999
! page 134
Timeout before saving medium priority user data
The value has to be a number in the range 1 to 999
! page 134
! page 115
! page 116
! page 134 or ! page 121