Terminal Hostname; Terminal Ip Address; Terminal Mask - Siemens optiPoint 410 entry Administrator's Manual

Terminal Hostname

• This field ist provided with the E164 number but you can change it. En-
ter a new host name for the telephone. The host name is transmitted
to the DHCP server together with the MAC address while the tele-
phone registers at the DHCP server. The DHCP server sends an IP ad-
dress to the telephone; at the same time, it transmits this IP address
together with the host name to the DNS server, where this association
is registered. Within the DNS server's range, the telephone can now
be addressed using its host name.
• If Mobility is unsing, the hostname is overwriten by the current E164
number of the Mobility user. The new hostname can be used to open
the WBM of the phone in the browser.
• DHCP has to be activated to enable this feature.
! page 57 ! page 114

Terminal IP address

• Enter the ! IP address for the optiPoint 410/420 family S V6.0 if not
provided by ! DHCP dynamically (! DHCP IP assignment).
• If the value was assigned dynamically, it can only be read.
• The change will only have effect if you restart the phone.
• Value range table:
Permitted values
Length max.
• Editing by phone: IP Number Editor ! page 159.
! page 57 ! page 114

Terminal mask

• Enter the ! Subnet Mask for the optiPoint 410/420 family S V6.0 if not
provided by ! DHCP dynamically (! DHCP IP assignment).
• If the value was assigned dynamically, it can only be read.
• The change will only have effect if you restart the phone.
• Value range table:
Permitted values
Length max.
• Editing by phone: IP Number Editor ! page 159.
! page 57 ! page 114
numeric
15 digits (incl. dots)
numeric
15 digits (incl. dots)
Alphabetical Reference
221