Manual Configuration - Siemens optiPoint 410 entry Administrator's Manual

Manual Configuration

If your network does not use a DHCP server, you must disable the DHCP
IP assignment manually and specify the phone's IP address and subnet
mask and the network gateway IP address (default route) for the phone.
In this case the following parameters have to be configured:
Phone path
Parameter
(Menu ! page 148)
DHCP
IP Assignment - 01=Network
- 01=DHCP IP assign
!
page 175
(switch off)
Terminal
IP Address
- 01=Network
- 02=Terminal IP addr.
!
page 221
(change IP address)
Terminal Mask
- 01=Network
!
page 221
- 03=Terminal mask
(change terminal mask)
Default Route
- 01=Network
!
page 174
- 04=Default route
(change default route)
1 as long as no IP connection exists
If you want to use the Web Interface for further administration (phone con-
figuration by PC) you have to reboot the phone now.
Basic Administration
Web Interface path
(Menu ! page 110)
1
(not applicable )
*
(not applicable )
*
(not applicable )
*
(not applicable )
51