Download Print this page
Hide thumbs Also See for Optipoint 420:

Advertisement

Quick Links

Siemens Optipoint Phone Quick Reference
Setting up Voice Mail:
• The extension number to reach the Voice Mail system is: 6-1380, DID 461-1380.
(There is also a "Voice Mail" key on the handset programmed to dial 6-1380 that
will also connect you to the Voice Mail System.)
• The default Security Code is: 0000
• You must complete the entire Voice Mail setup process or you will be required to
change the security code each time you enter the Voice Mail setup following each
non-completed setup.
• Follow all of the voice prompts, however contrary to the voice instructions, please
include your name in your personal greeting.
• The "Mailbox" lamp is similar to the "Mgswt" lamp on the old system.
a. Depressing the "Mailbox" button will not connect you to the Voice Mail
service.
b. Depressing the "Mailbox" button while the "Mailbox" lamp is illuminated
by the Voice Mail system will produce the message "Mailbox not
Possible" on the handset display.
c. When the "Mailbox" lamp is illuminated by the Voice Mail system you
must clear your Voice Mail messages in order to tum off the "Mailbox"
lamp.
If you experience problems with your Voice Mail system following the initial
setup, please contact Telcom at 460-7114.

Advertisement

loading

Summary of Contents for Siemens Optipoint 420

  • Page 1 Siemens Optipoint Phone Quick Reference Setting up Voice Mail: • The extension number to reach the Voice Mail system is: 6-1380, DID 461-1380. (There is also a "Voice Mail" key on the handset programmed to dial 6-1380 that will also connect you to the Voice Mail System.) •...

This manual is also suitable for:

Hipath 4000