No Sntp Server Available; Response Timer - Siemens HiPath 8000 Administrator's Manual

administration.fm
Administration
System Settings
3.4.3.2

No SNTP server available

If no SNTP server is available, date and time must be set manually.
The manual setting of Time and Date is located in the user menu, not in the
>
administrator menu.
Data required
• Local time (hh:mm): Local time.
• Local date (day, month, year): Local date.
• Allow daylight saving: Defines whether there is daylight is set.
• Difference (minutes): Timezone offset in minutes.
Administration via WBM
(User pages >) Date and time
Administration via Local Phone
|
--- Menu
|
--- Date and Time
|--- Time
|--- Date
|--- Daylight saving
|
--- Difference (mins)
3.4.3.3

Response Timer

The Response timer is started whenever the phone sends a new message to the SIP server.
If the timer expires before the phone gets a response from the SIP server, the phone assumes
that the server had died and then attempts to contact the backup server, if configured. If there
is no backup server configured, the phone just tidies up internally.
The data is given in milliseconds. The default value is 32 000; for the HiPath 8000, the recom-
mended setting is 3.7 seconds (3700 ms).
3-26
A31003-01010-M11-1-7619, 29/01/2007
HiPath 8000 - OpenStage 60/80, Administrator Manual