Forwarding Calls For A Different Terminal; Storing A Destination For Another Telephone/Activating Call Forwarding - Siemens HiPath 4000 Operating Instructions Manual

Step by Step
qeh qhee
or
or
Enter the code!
Store
Forwarding calls for a different
terminal
You can store, activate, check and deactivate call for-
warding for another telephone, fax machine or PC from
your own telephone. To do so, you need to know the
PIN for this terminal or you must have the "Call forward-
ing for remote terminal" class of service.
Precondition: The "store" key is configured on your
telephone.
Storing a destination for another
telephone/activating call forwarding
n
Lift the handset.
UK code or Standard code/Euro code.
Enter the code which has been programmed for you.
pr
Enter the number of the other telephone and confirm
your input with the square key.
pr
Enter the PIN of the other telephone and confirm your
input with the square key.
r
or Press the square key only
(if your own station has the "Call forwarding for remote
terminal" class of service).
pr
Enter the number of the destination and confirm your
input with the square key.
r
or Press the square key only
(the telephone on which you are storing call forwarding
thus becomes the call forwarding destination).
Wait for the acknowledgment tone.
Press the key. The lamp goes out.
Call forwarding is thus activated.
t
Replace the handset.
Forwarding calls
39