Cateye Strada Smart CC-RD500B Online Manual page 90

Set the tire circumference for a sensor capable of speed measurement.
• Pairing (sensor ID synchronization) must be performed first.
Pairing (Sensor ID synchronization)
• Set tire circumference for each sensor. The default value is 2,096 mm (700x23c).
1. From the measurement screen, press MENU to switch to the menu
screen.
* When the menu screen is left on for 1 minute, Strada Smart returns to the measurement
screen.
2. Press MODE to display
seconds.
3. Select the sensor you want to set, and enter the tire circumference.
Enter the circumference in mm of the tire (the length of the outer circumference of the tire)
on which the sensor is installed.
(Setting range: 0100 – 3999 mm)
Determining tire circumference
Strada Smart
Clock setting
Tire circumference setting
Important
Measurement
screen
(tire icon) and then press MODE for 2
Menu screen
(Clock setting)
(2 seconds)