Cateye Strada Smart CC-RD500B Online Manual page 67

* Heart rate and cadence data will not be displayed unless each sensor is paired.
*Average values are displayed as .E instead of the measurement value when Elapsed
Time exceeds approximately 27 hours. Average speed is also displayed as .E instead of
the measurement value when Trip Distance exceeds 1,000 km [620 mile].
Reset Strada Smart and start measurement again to enable average value
measurement.
Reset operation
If there is no sensor signal nor button operation for 10 minutes, the power-saving screen is
activated. If such a state continues for a further hour, the sleep display is activated.
The power-saving screen returns to the measurement screen when the bicycle starts
moving.
Measurement
screen
When a signal is received from a paired power sensor, power is displayed as one of the
current functions.
Power-saving mode
Strada Smart
When left
for
approx. 10
min
Power-saving screen
If you have power sensors
Strada Smart
Power
When left for
approx. 60 min
Sleep