Cateye Strada Smart CC-RD500B Online Manual page 126

• Pairing (sensor ID synchronization) must be performed in order to use Strada Smart and
sensors.
• Do not pair sensors at a race venue or in similar locations where there are a lot of other
users. Doing so may cause Strada Smart to be paired with another device.
1. From (MENU) at the top left of the screen, turn on [Connect], and
then tap [Device].
Tap [Device Pairing] to start pairing.
For instructions on using devices, refer to the following:
1. Press MODE to display the smartphone search screen.
* If on the measurement screen, pressing for 1 second switches to the smartphone
search screen.
When Cateye Cycling™ detects Strada Smart, a message is displayed on the
smartphone.
Tap [Pair] to complete pairing.
After pairing is completed, from
switch to the Trip screen.
Pairing
Important
Smartphone
Pairing with Strada Smart
Strada Smart
Smartphone
search
screen
Smartphone
(MENU) at the top left of the screen, tap [Trip] to