Cateye Strada Smart CC-RD500B Online Manual page 17

Cateye Cycling™, Cateye's free smartphone app, records trip data using your smartphone's
GPS.
By combining the app with a Bluetooth sensor, it is also possible to reliably measure heart
rate, cadence, and other data as well as current speed.
1. Install Cateye Cycling™.
If using an iPhone
Access the App Store, search for "Cateye Cycling", and install the app.
If using an Android smartphone
Access Google Play, search for "Cateye Cycling", and install the app.
* See the product page for information about model recommended for use with Cateye
Cycling™.
2. Launch Cateye Cycling™.
Follow the on-screen instructions and allow the use of GPS and Bluetooth devices.
When the smartphone's Bluetooth settings are turned on, it will search for devices, but
do not configure settings at this stage. Switch to Cateye Cycling™ and follow the
procedure below.
Once basic settings are complete the Trip screen appears.
* If you are not planning to use a sensor, setup is now complete.
If you are planning to use a sensor, follow the procedure below.
Cateye Cycling™ can be used with sensors compatible with Bluetooth 4.0. Pair it with
optional accessories or commercial sensors as required.
• Pairing (ID synchronization) must be performed in order to use a sensor.
• Do not pair sensors at a race venue or in similar locations where there are many other
users. Doing so may cause Strada Smart to be paired with another device.
• Pair all sensors that you intend to use. If you want to pair another sensor, repeat the
same procedure again.
1. Pair with a sensor.
Setup with smartphone
Setup
Important
Pairing with a sensor
Important