Cateye Strada Smart CC-RD500B Online Manual page 120

When using a speed (cadence) sensor (ISC-12), if the wheel magnet moves so that it is
not facing the sensor zone, the computer registers the speed signal as 0 and
measurement is not possible. (This is because the speed signal from the sensor has
priority over GPS when measuring speed.)
Have you paired the sensor?
• You must pair Strada Smart with your smartphone via Cateye Cycling™.
Smartphone : Pairing with a sensor
Are you using a Bluetooth Smart sensor?
• Strada Smart can only receive signals from Bluetooth Smart sensors.
The sensor battery may be flat.
• Replace the battery with a new one.
Battery replacement : Optional sensors
The magnet may not be in the correct position relative to the speed sensor or speed
(cadence) sensor (ISC).
Refer to the sensor instruction manual and attach the sensor correctly.
Mounting the speed (cadence) sensor (ISC-12)
You may have to wait a little longer after starting measurement.
• Your smartphone may take a while to acquire GPS in some cases.
Wait somewhere outdoors for a while before starting.
* The time it takes to acquire GPS will depend on your smartphone.
The location or weather may not be appropriate for acquiring a GPS signal.
• If your smartphone's GPS connection is lost, Strada Smart can no longer perform
measurement.
* For information on how to acquire a GPS signal, refer to your smartphone instruction
manual.
I lost the connection between my smartphone and a connected device
(Strada Smart or sensor). How do I reconnect them?
Restart your smartphone.
If this does not resolve the issue, press the AC button
on the back of Strada Smart. (Restart operation)
Why is Strada Smart sometimes in sleep mode when I go back to my bike after leaving it for
Why can't I measure speed?
Why is the sensor signal not being received?
Why can't I measure without a speed sensor?
a while?