Cateye Strada Smart CC-RD500B Online Manual page 47

Finishing measurement (reset operation)
Pressing MODE for 3 seconds finishes measurement. Trip data is saved temporarily on
the smartphone and measurement values are reset.
The screen changes to the [ready] display, ready to start the next measurement.
Saving and uploading trips
!Functions during measurement
You can switch the display of data being measured in Cateye Cycling™ by pressing
MODE.
* The data displayed changes depending on the state of the sensor connection.
Strada Smart
Reset/
finish trip
Paused
(3 seconds)
Switching measurement data display
Strada Smart
Measurement
standby