Wiring Diagrams - Regency ULTIMATE U39 Owners & Installation Manual

installation
|
32

WIRING DIAGRAMS

This heater does not require a 120V A.C. supply
for operation. In case of a power failure, the
burner switch and the optional remote control/
thermostat will continue to operate. However, a
120V A.C. power supply is needed for the fan/
blower operation.
Receiver Hearth Mount
CAUTION: Label all wires
prior to disconnection
when servicing controls.
Wiring errors can cause
improper and dangerous
operation.
32 |
Regency U39-10 ULTIMATE Direct Vent Freestanding Gas Stove
®
(Do not cut the ground terminal off under
any circumstances.)
Star
washer
Lockwasher
Nut
Star
Nut
washer
#8 Ground Lug
Power Fan
cord ground
ground
wire
RECEIVER
NOTE: Even if the fan is not purchased
with the unit, it is still a good idea to
bring power to the receptacle box
(provided with the unit) in case the
fan is installed at a later date.
Ground
Neutral
Live
Green
120V AC
Ground
60 Hz
FCM-COM
TH
To
Electrode
DC
Spark Box
TP
Red
Black
TPTH
MOTOR
Thermostat
(Optional)
(Millivolt)
Caution: Ensure that the wires do
not touch any hot surfaces and are
away from sharp edges.
Fan
Fan Thermodisc
(Normally Open)
Thermodisc Cage
(+) (-)
White
Green