Wiring Diagrams - Regency C33-LP3 Owners & Installation Manual

INSTALLATION
This heater does not require a 120V A.C. sup-
ply for operation. In case of a power failure, the
burner switch and the optional remote control/
thermostat will continue to operate. However,
a 120V A.C. power supply is needed for the
fan/blower operation.
NATURAL GAS
For
This appliance is equipped with a three pronged (grounding) plug for your protection against shock hazard and should
be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from
this plug.
14

WIRING DIAGRAMS

Caution: Ensure that the wires do
not touch any hot surfaces and are
away from sharp edges.
NOT
Units and Units
WARNING: Electrical Grounding Instructions
CAUTION:
to disconnection when servicing
controls. Wiring errors can cause
improper and dangerous opera-
tion.
Equipped with DC Spark Boxes
®
Regency CLASSIC C33-3 Freestanding Gas Stove
Label all wires prior