Insufficient Memory To Support Resource Save Feature; Insufficient Memory To Collate Job; Insufficient Memory For Flash Memory Defragment Operation; Memory Full - Lexmark X940E User Manual

Understanding printer messages
•
Check that the paper size is correctly set. For example, if the MP Feeder Size is set to Universal, make sure the paper
is large enough for the data being printed.
•
Cancel the current print job.

35 Insufficient memory to support Resource Save feature

•
Touch Continue to disable Resource Save and continue printing.
• To enable Resource Save after receiving this message, make sure the link buffers are set to Auto, and then exit the
menus to activate the link buffer changes. When Ready appears, enable Resource Save.
• Install additional memory.

37 Insufficient memory to collate job

•
Touch Continue to print the portion of the job already stored and begin collating the rest of the print job.
• Cancel the current print job.

37 Insufficient memory for Flash Memory Defragment operation

•
Touch Continue to stop the defragment operation and continue printing.
•
Delete fonts, macros, and other data in printer memory.
•
Install additional printer memory.
37 Insufficient memory, some held jobs will not be restored
The printer was unable to restore some or all of the confidential or held jobs on the printer hard disk.
Touch Continue to clear the message.

38 Memory full

•
Touch Continue to clear the message.
• Cancel the current print job.
•
Install additional printer memory.
39 Page is too complex to print
• Touch Continue to clear the message and continue printing.
•
Cancel the current print job.
•
Install additional printer memory.
40 <color> invalid refill, change cartridge
Remove the specified toner cartridge, and then install a new one.
202