Safety Information - Lexmark X940E User Manual

Safety information

Safety information
Connect the power supply cord to a properly grounded electrical outlet that is near the product and easily accessible.
Refer service or repairs, other than those described in the user documentation, to a professional service person.
CAUTION—SHOCK HAZARD: Do not use the fax feature during a lightning storm. Do not set up this product or
make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning
storm.
Use only a 26 AWG or larger telecommunications (RJ-11) cord when connecting this product to the public switched
telephone network.
CAUTION—POTENTIAL INJURY: The printer weighs 91.2 kg (201 lbs); therefore, it requires two people to roll it
safely into place. The scanner weighs 25 kg (55 lb); therefore, it requires two people to roll it safely while it is on
its scanner shelf.
CAUTION—POTENTIAL INJURY: The printer weighs 91.2 kg (201 lbs); therefore, it requires two people to roll it
safely.
CAUTION—POTENTIAL INJURY: If you are installing memory or option cards sometime after setting up the
printer, turn the printer off and unplug the power cord from the wall outlet before continuing. If you have any
other devices attached to the printer, turn them off as well and unplug any cables going to the printer.
CAUTION—POTENTIAL INJURY: Turn the printer off, and unplug the power cord from the wall outlet before
installing an internal option. If you have any other devices attached to the printer, turn them off as well and
unplug any cables going into the printer.
CAUTION—SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone system
connections) are properly installed in their marked plug-in ports.
CAUTION—POTENTIAL INJURY: If you are installing a memory card after setting up the printer, turn the printer
off, and unplug the power cord from the wall outlet before continuing.
This product is designed, tested, and approved to meet strict global safety standards with the use of specific Lexmark
components. The safety features of some parts may not always be obvious. Lexmark is not responsible for the use of
other replacement parts.
This product uses a laser.
CAUTION—POTENTIAL INJURY: Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
This product uses a printing process that heats the print media, and the heat may cause the media to release emissions.
You must understand the section in your operating instructions that discusses the guidelines for selecting print media
to avoid the possibility of harmful emissions.
This symbol indicates the presence of a hot surface or component.
CAUTION—HOT SURFACE: To reduce the risk of injury from a hot component, allow the surface to cool before
touching it.
This product uses a ground fault circuit interrupter (GFCI). Monthly testing of the GFCI is recommended.
CAUTION—POTENTIAL INJURY: If you are installing memory or option cards sometime after setting up the
printer, turn the printer off and unplug the power cord from the wall outlet before continuing. If you have any
other devices attached to the printer, turn them off as well and unplug any cables going to the printer.
12