Solving Printing Problems; Multiple-Language Pdfs Do Not Print; Control Panel Display Is Blank Or Displays Only Diamonds; Error Message About Reading Usb Drive Appears - Lexmark X940E User Manual
Lexmark printer user guide
Hide thumbs
Also See for X940E:
- Service manual (815 pages) ,
- Technical reference (403 pages) ,
- User manual (272 pages)
Table of Contents
Advertisement
Troubleshooting
2
Press the A1 green lever down to its normal position.
3
Close Door A.
Solving printing problems
Multiple‑language PDFs do not print
The documents contain unavailable fonts.
1
Open the document you want to print in Adobe Acrobat.
2
Click the printer icon.
The Print dialog appears.
3
Select Print as image.
4
Click OK.
Control panel display is blank or displays only diamonds
The printer self test failed. Turn the printer off, wait about 10 seconds, and then turn the printer back on.
If Performing Self Test and Ready do not appear, turn the printer off and contact Customer Support.
Error message about reading USB drive appears
Make sure the USB drive is supported. For information regarding tested and approved USB flash memory devices, visit
the Lexmark Web site at www.lexmark.com.
238
Advertisement
Table of Contents
