Copying; Making Copies; Making A Quick Copy; Copying Using The Adf - Lexmark X940E User Manual

Copying

Copying
ADF
Use the ADF for multiple‑page documents.

Making copies

Making a quick copy

1
Load an original document faceup, short-edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, adjust the paper guides.
3
From the control panel, press
Note: If an LDSS profile has been installed, you may receive an error when attempting a quick copy. Contact
your system support person for access.
4
If you placed the document on the scanner glass, touch Finish the Job if you are done.

Copying using the ADF

1
Load an original document faceup, short-edge first into the ADF or facedown on the scanner glass.
Note: Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
2
If you are loading a document into the ADF, adjust the paper guides.
3
On the home screen, touch Copy, or use the keypad to enter the number of copies.
The copy screen appears.
Scanner glass
Use the scanner glass for single pages, small items (such as postcards or
photos), transparencies, photo paper, or thin media (such as magazine
clippings).
.
54