Installing A Flash Memory Or Firmware Card - Lexmark X940E User Manual

Installing options
4
Align the notches on the memory card with the ridges on the connector.
1 Notches
2 Ridges
5
Push the memory card straight into the connector until it snaps into place.
6
Reinstall the system board.

Installing a flash memory or firmware card

The system board has two connections for an optional flash memory or firmware card. Only one of each may be installed,
but the connectors are interchangeable.
CAUTION—POTENTIAL INJURY: If you are installing a memory card after setting up the printer, turn the printer
off, and unplug the power cord from the wall outlet before continuing.
Warning—Potential Damage: System board electrical components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
1
Access the system board.
2
Unpack the card.
Note: Avoid touching the connection points along the edge of the card.
27