Outline Of Operation Control By Microcomputer - Mitsubishi Heavy Industries SRK20ZJX-S Service Manual

1 OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER

1.1 SRK, SRF and SRR series
(1) Operation control function by remote control
Remote controller
SRK series
Operation section
FAN SPEED button
HI POWER/ECONO button
TEMPERATURE button
ON TIMER button
SLEEP button
CLEAN switch
CANCEL button
SRF series
Operation section
Operation section
FAN SPEED button
Each time the button is pressed, the
display is switched over in turn.
HI POWER/ECONO button
This button changes the HIGH POWER/
ECONOMY mode.
TEMPERATURE button
These buttons set the indoor temperature.
(These buttons are used for setting the
current time and timer function as well.)
ON TIMER button
This button selects ON TIMER operation.
SLEEP button
This button selects SLEEP operation.
CLEAN switch
This switch selects the CLEAN mode.
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
• The above illustration shows all controls, but in practice
only the relevant parts are shown.
5
-
OPERATION MODE select button
ON/OFF (luminous) button
AIR FLOW (UP/DOWN) button
AIR FLOW (LEFT/RIGHT) button
3D AUTO button
OFF TIMER button
RESET switch
ALLERGEN CLEAR button
OPERATION MODE select button
Each time the button pressed, the
display is switched over in turn.
ON/OFF (luminous) button
Press to start operation, press again to
stop.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/down)
direction.
SRR series
Air flow direction adjustment
can not be performed.
OFF TIMER button
This button selects OFF TIMER operation.
ACL switch
This switch is for resetting microcomputer
and setting time.
-
'10 • SCM-SM-094