Outline Of Operation Control By Microcomputer; Operation Control Function By Remote Control Switch - Mitsubishi Heavy Industries SRK10CFV-4 Technical Manual & Parts List

4

OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER

4.1 Operation control function by remote control switch

Remote control
Models SRK10CFV-4, 13CFV-4
◆ Operation selection
FAN SPEED button
Each time the button is pushed, the
indicator is switched over in turn.
HI POWER/ECONO button
This button changes the HIGH POWER/
ECONOMY mode.
TEMPERATURE button
This button sets the room temperature.
(This button changes the present time and
TIMER time.)
ON TIMER button
This button selects ON TIMER operation.
SLEEP button
This button changes to SLEEP operation.
CLEAN switch
This switch changes the CLEAN mode.
◆ Indication selection
CLEAN indicator
Indicates during CLEAN operation.
SLEEP indicator
Indicates during SLEEP operation.
TEMPERATURE indicator
Indicates set temperature.
(Does not indicate temperature when operation
mode is on AUTO)
FAN SPEED indicator
Indicates set air flow rate with lamp.
HI POWER/ECONO MODE indicator
Indicates during HIGH POWER/ECONOMY
mode operation.
All manuals and user guides at all-guides.com
• The above illustration shows all controls, but in practice
only the relevant parts are shown.
9
- -
OPERATION MODE select button
Each time the button pushed, the
indicator is switched over in turn.
ON/OFF (luminous) button
Press for starting operation, press again
for stopping.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/down) mode.
AIR FLOW (LEFT/RIGHT) button
This button changes the air flow (left/right) mode.
3D AUTO button
This button sets 3D AUTO operation.
OFF TIMER button
This button selects OFF TIMER operation.
RESET switch
Switch for resetting microcomputer and
setting time.
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
ON/OFF TIMER indicator
Indicates during ON/OFF TIMER operation.
OPERATION MODE indicator
Indicates selected operation with lamp.
(Auto) • (Cool) • (Fan) • (Dry)]
[
TIME indicator
Indicates present time or timer setting time.
AIR FLOW indicator
Shows selected flap and louver mode.
3D AUTO indicator
Indicates during 3D AUTO operation.