Outline Of Operation Control By Microcomputer; Operation Control Function By Wireless Remote Control - Mitsubishi Heavy Industries SRK15ZTL-W Service Manual

1. OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER

(1) Operation control function by wireless remote control

Operation section
LCD screen
Press the button of the remote control
lights the backlight.
The backlight can be turned on/off.
TEMP/TIMER button
This button sets the room temperature.
This button is used for setting the current
time and timer function.
FAN SPEED/PRESET button
Each time the button is pressed, the fan
speed changes.
This button sets the PRESET operation.
OPERATION MODE select button
Each time the button is pressed, the
mode changes.
SILENT button
This button sets the SILENT operation.
ALLERGEN CLEAR button
This button selects ALLERGEN
CLEAR operation.
3D AUTO button
This button sets 3D AUTO operation.
ON TIMER button
This button selects ON TIMER operation.
OFF TIMER button
This button selects OFF TIMER operation.
MENU switch
This switch selects the SELF CLEAN
operation, Display brightness adjustment, Backlight setting,
Fan control in heating thermo-OFF, wireless LAN
communication setting, wireless LAN connection
setting and SILENT mode setting.
Unit display section
RUN light (green)
• Illuminates during operation.
•
Blinks slowly when SELF CLEAN operation
(3 seconds ON, 1 second OFF).
•
Blinks when air flow is stopped to
prevent blowing out of cold air in
heating operation. (1.5 seconds ON,
0.5 seconds OFF)
[View with the cover opened]
The above illustration shows all
controls, but in practice only the
relevant parts are shown.
3
- -
'22 • SRK-SM-349
Transmission section
ON/OFF (luminous) button
Press to start operation, press again
to stop.
Hi/ECO button
This button changes the HIGH POWER/
ECONOMY operation.
SLEEP button
This button selects SLEEP operation.
NIGHT SETBACK button
This button sets NIGHT SETBACK
operation.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/
down) direction.
AIR FLOW (LEFT/RIGHT)/Child
lock button
This button changes the air flow (left/
right) direction.
This button use to set Child lock.
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
ACL switch
This switch resets the program to default
state.
TIME SET UP switch
This switch is used for setting the time.
Remote control signal receiver
Unit ON/OFF button
This button can be used for turning on/off
the unit when a remote control is not available.
TIMER light (yellow)
Illuminates during TIMER operation.