Outline Of Operation Control By Microcomputer - Mitsubishi Heavy Industries SRK28HJ Technical Manual

4 OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER

(1) Remote controller
FAN SPEED indicator
Indicators the ¡ for the fan speed which has
been set.
ON-TIMER • OFF-TIMER indicator
FAN SPEED button
Each time the button is pushed, the ¡
indicator is switched over in turn.
HI POWER button
This button changes the HI POWER
operation.
SET TEMPERATURE button
This button sets the room temperature.
ECONOMY button
This button changes the ECONOMY operation.
SET TIMER button
This button sets the ON TIMER time or SLEEP
time.
¡ Above figure shows all indications for the
purpose of explanation, but practically only
the pertinent parts are indicated.
Indoor unit indicator
HI POWER
TIMER
CONT HI POWER ECONO
AUTO
HI
MED
LO
ON OFF TIMER
FAN SPEED
HI POWER
ECONO SET TIMER
ECONO
RUN
-
ON/OFF MODE
TEMP AIR FLOW
TIMER
ACL
ECONOMY light (green)
Illuminates during ECONOMY operation.
HI POWER light (orange)
Illuminates during HI POWER operation.
TIMER light (yellow)
Illuminates during TIMER operation.
RUN (HOT KEEP) light (green)
• Illuminates during operation.
• Flashs at air flow stop due to the 'HOT KEEP'.
10
-
: http://splitoff.ru/tehn-doc.html
HI POWER operation indicator
Indicators during HI POWER operation.
ECONOMY operation indicator
Indicators during ECONOMY operation.
Operation switch over indicator
Indicators the ¡ for the operation which has
been set.
AIR FLOW indicator
Indicates selected flap mode.
OPERATION MODE select button
Each time the button is pushed, the ¡
indicator is switched over in turn.
ON/OFF button
This button, when pressed, starts operation
and stops when repressed.
AIR FLOW button
This button changes the flap mode.
TIMER button
The button selects ON TIMER operation,
OFF-TIMER operation or normal operation.
Reset switch
Switch for resetting microcomputer.