Outline Of Operation Control By Microcomputer; Operation Control Function By Wireless Remote Control - Mitsubishi Heavy Industries SRK63ZR-WF Technical Manual

9. OUTLINE OF OPERATION CONTROL BY MICROCOMPUTER

(1) Operation control function by wireless remote control

Operation section
OPERATION MODE select button
Each time the button is pressed, the
mode changes.
TEMPERATURE button
This button sets the room temperature.
HI/ECO button
This button changes the HIGH POWER/
ECONOMY operation.
AIR FLOW (LEFT/RIGHT) button
This button changes the air flow (left/
right) direction.
SILENT button
This button sets the SILENT operation.
ALLERGEN CLEAR button
This button selects ALLERGEN CLEAR
operation.
ON TIMER button
This button selects ON TIMER operation.
OFF TIMER button
This button selects OFF TIMER
operation.
WEEKLY button
This button switches the WEEKLY
TIMER to ON/OFF.
MENU switch
This switch selects the SELF CLEAN
operation, wireless LAN communication
setting, wireless LAN connection
setting and PRESET operation.
SLEEP button
This button selects SLEEP operation.
Unit display section
Unit ON/OFF button
This button can be used for turning on/off the unit when
a remote control is not available.
RUN light (green)
• Illuminates during operation.
• Blinks slowly when SELF CLEAN operation
(3 seconds ON, 1 second OFF).
•
Blinks when air flow is stopped to prevent
blowing out of cold air in heating operation.
(1.5 seconds ON, 0.5 seconds OFF).
[View with the cover opened]
The above illustration shows all controls, but in practice
only the relevant parts are shown.
36
- -
'22 • SRK-T-362
Transmission section
ON/OFF (luminous) button
Press to start operation, press again
to stop.
FAN SPEED button
Each time the button is pressed, the fan
speed changes.
AIR FLOW (UP/DOWN) button
This button changes the air flow (up/
down) direction.
3D AUTO button
This button sets 3D AUTO operation.
NIGHT SETBACK button
This button sets NIGHT SETBACK
operation.
SET/Child lock button
Use this button to set the timer and
Child lock.
CANCEL button
This button cancels the ON timer, OFF
timer, and SLEEP operation.
TIMER button
This button is used for setting the current
time and timer function.
PROGRAM button
This button sets WEEKLY TIMER.
ACL switch
This switch resets the program to default
state.
TIME SET UP switch
This switch is used for setting the time.
Remote control signal receiver
TIMER light (yellow)
Illuminates during TIMER operation.
HI POWER light (green)
Illuminates during HIGH POWER operation.
3D AUTO light (green)
Illuminates during 3D AUTO operation.