Parts Catalog; How To Use This Parts Catalog - Lexmark OptraTM Service Manual

4026-0XX

6. Parts Catalog

How To Use This Parts Catalog

•
SIMILAR ASSEMBLIES: If two assemblies contain a majority of
identical parts, they are broken down on the same list. Common
parts are shown by one index number. Parts peculiar to one or
the other of the assemblies are listed separately and identified
by description.
•
AR: (As Required) in the Units column indicates that the quan-
tity is not the same for all machines.
•
NS: (Not Shown) in the Asm-Index column indicates that the
part is procurable but is not pictured in the illustration.
•
PP: (Parts Packet) in the parts description column indicates the
part is contained in a parts packet.
•
INDENTURE: The indenture is marked by a series of dots
located before the parts description. The indenture indicates the
relationship of a part to the next higher assembly. For example:
INDENTURE RELATIONSHIP OF PARTS
(No dot) MAIN ASSEMBLY
(One dot) o Detail parts of a main assembly
(One dot) o Subassembly of the main assembly
(Two dot) o o Detail part of a one-dot subassembly
(Two dot) o o Subassembly of a one-dot subassembly
Parts Catalog 6-1