Table of Contents
Advertisement
4026-0XX
User Error Message
Resolution Reduction
Data Transmission
Error
Flash Memory Full
LED Status
Ready, Data blinking
and the Error, Press
Button on solid
Data, Error, and Press
Button on solid
Error blinking and
Press Button on solid
Action
Switch from the GL/2
or raster mode to
Quick Print Plus mode
using the Lexmark
driver for Windows, or
press the operator
panel button to
resume printing, or do
a front panel reset by
pressing and holding
the operator button for
more than three sec-
onds.
Switch to Print Accel-
erator using the Lex-
mark driver for
Windows if 2MB of
memory or more is
installed, or switch to
the GL/2 printing
mode using the Lex-
mark driver for Win-
dows, or push the
operator panel button
to resume printing, or
do a front panel reset
by pressing and hold-
ing the operator panel
button for more than
three seconds.
This condition only
occurs when the
Flash memory is full.
Diagnostic Information 2-9
Advertisement
Table of Contents
