4026-0XX
Transfer Corona Service Check
FRU
1
Transfer
Corona
ROM SIMM Service Check
FRU
1
ROM SIMM
Action
Be sure the transfer corona is clean. Clean with
the transfer cleaning tool located on the upper
fuser cover.
Check the high voltage contacts for pitting, con-
tamination, or damage. Be sure the corona
assembly is correctly installed in the transfer
assembly. Replace as necessary.
Be sure the wires T and TRET are not broken or
damaged, and are properly connected to the
transfer assembly and the HVPS. Replace as
necessary.
Action
Be sure the correct ROM SIMM is installed.
Models 4026-06B and 06F require ROM SIMM
with flash.
Be sure the ROM SIMM is correctly installed in
location socket (J8).
Diagnostic Information 2-45