Table of Contents
Advertisement
4026-0XX
18. The polygon motor (printhead motor) turns off.
19. The Data LED turns off.
20. The Ready LED stays on solid.
If your printer did not successfully complete POST, locate the
symptom in the
"POST Symptom Table" on page 2-12
and take the
appropriate action.
If the printer completes all these steps and no error indications are
displayed, the printer has successfully completed the POST. If the
printer has completed POST without an error and a symptom exists,
go to the
"Symptom Table" on page
2-13.
Diagnostic Information 2-11
Advertisement
Table of Contents
