Job Menu - Lexmark Optra M410 User Manual

Utilities Menu (continued)
Menu Item
Job Acct Stat
Hex Trace
Note:
For documentation pur-
poses, Print and Hold jobs refers
to any of the following jobs: Con-
fidential Job, Reserve Print Job,
Repeat Print Job, and Verify
Print Job. See page 108 for
more information on Print and
Hold jobs.
Values
Print
Clear
The Job Acct Stat menu item only displays if a hard disk option is installed in your printer and
is not defective or Read/Write or Write protected.
be set to .
On
Select to print a list of statistics for a defined number of the most recent print jobs. (The
Print
number of jobs is determined by the value of the
). The statistics include if the job printed with or without errors, the time required
SETUP MENU
to print the job, the size (in bytes) of the job, the requested paper size and paper type, the total
number of printed pages, and the number of copies requested.
Select to delete all accumulated job statistics from the hard disk option.
Clear
Accounting Stat displays until the process completes. See
page 152 for more information.
Press to enter Hex Trace mode.
Select
helps isolate the source of a print job problem. With
Hex Trace
sent to the printer is printed in hexadecimal and character representation. Control codes are
not run.
To exit , turn the printer power Off (O), or reset the printer. To reset the printer, press
Hex Trace
or .
Menu> <Menu

JOB MENU

the second line of the operator panel display. Press
Note: Resetting the printer deletes all current data from the print buffer, including all Print and
Hold jobs. See
Reset Printer
Job Menu
Job Accounting
Job Acct Limit
displays. Press
Menu>
on page 70 for more information.
Some JOB MENU menu items are available when the
printer displays the
Ready
not accepting, formatting, or printing a job. Other menu
items in JOB MENU are only available when the printer is
busy processing or printing a job, when a printer message
other than displays, or when the printer is in
Ready
mode.
Trace
in the
SETUP MENU
menu item in the
Clearing Job Accounting Stat
selected, all data
Hex Trace
or until
<Menu Reset Printer
.
Select
message and is idle since it is
Operator Panel Menus
must
Clearing Job
on
appears on
Hex
59