Lexmark Optra M410 User Manual page 94

PCL Emul Menu (continued)
Menu Item
TRAY RENUMBER
Auto CR after LF
Auto LF after CR
*Factory default
82
Chapter 3: Using the Operator Panel and Menus
Values
Assign MP Feeder
Assign Tray 1
Assign Tray 2
Assign Man Paper
Assign Man Env
Each of the above menu items supports the following three values:
Off*
0 ... 199
None
VIEW FACTORY DEF
Restore Defaults
Yes
No
Note: only displays if the optional 500-sheet drawer is installed.
Assign Tray 2
only displays when
Assign MP Feeder
Only installed paper sources display on the operator panel as values. However, you may set
to uninstalled sources.
TRAY RENUMBER
The
TRAY RENUMBER
or applications that use different source assignments to request a given input source.
Select to use the factory default paper source assignments.
Off
Select a numeric value (
Select VIEW FACTORY DEF
In the Restore Defaults
values.
See "Paper Sources and Sizes" on page 116 for information on available paper sources for
your printer.
Refer to the Technical Reference for more information about assigning source numbers.
Off*
On
The setting determines if the printer automatically performs a carriage return
Auto CR after LF
after a line feed control command.
Off*
On
The setting determines if the printer automatically performs a line feed after
Auto LF after CR
a carriage return control command.
Configure MP
menu item lets you configure your printer to work with printer drivers
) to assign a custom value to a paper source.
0 ... 199
to view the factory default values assigned to each paper source.
menu item, select Yes to return all tray assignments to factory default
is set to .
Cassette