Your Printer
Plastic Bracket
Printer
Metal
Bail
User's
Guide
CD
1
Unpacking
Power
Cord
Setting Up
Your Printer
Complete the following sections to set up your Lexmark™
Optra™ M410 and M412 printers.
1
Remove the printer and all items from the packag-
ing carton.
Save the carton and packing materials in case you
need to repack the printer for service or storage.
2
Make sure you have the items shown.
If any items are missing, contact the place where
you bought your printer.
3
Place the printer on a flat, sturdy surface in a well-
ventilated area.
Allow at least 304.8 mm (12 in.) of clearance on all
sides of the printer. Since you may want to install
the optional 500-sheet drawer, leave at least
129.6 mm (5.1 in.) clearance above the printer. Leave
enough space in front of the printer to allow for
easy paper access.
Unpacking Your Printer
1