Installing Memory Options - Lexmark Optra M410 User Manual

Installing
Memory Options
Warning!
Printer memory and
flash memory option cards are
easily damaged by static elec-
tricity. Touch something metal
before you touch an option card.
Memory Connector 1
Memory Connector 2
This section offers instructions for installing either a
printer memory option or a flash memory option card.
You may install any one of the following memory configu-
rations on your printer system board:
• One printer memory option.
• One flash memory option.
• One printer memory option and one flash memory
option.
• Two printer memory options.
Before installing any option card, you must remove the
printer system board cover.
1
Follow the steps in "Accessing the Printer System
Board" on page 201.
2
Locate the two memory connectors on the system
board.
Both memory connector 1 and memory connector 2
are capable of accepting either a printer memory
option or a flash memory option card.
3
Follow the steps under "Removing
Memory Options" on page 210 if you need to
remove an option card before you install a new
one. Otherwise, go to step 4.

Installing Memory Options

207