Transparencies; Envelopes - Lexmark Optra M410 User Manual

Transparencies

Warning!
When printing on
transparencies, be sure to set
the PAPER TYPE to Transpar-
ency from the printer driver, and
from either the operator panel or
from MarkVision to avoid dam-
aging your printer.

Envelopes

Note:
When printing on enve-
lopes, be sure to set the
to
SOURCE MP Feeder
, set the
Manual Env PAPER TYPE
to , and select the cor-
Envelope
rect envelope size from the
printer driver, and from either the
operator panel or from
MarkVision.
You can feed transparencies from the 250-sheet input tray
or the multipurpose feeder. Try a sample of any transpar-
encies you are considering using with the printer before
buying large quantities.
Do not load transparencies in the optional 500-sheet
drawer. To load transparencies in the 250-sheet input tray,
see page 124. To load transparencies in the multipurpose
feeder, see page 141.
When printing on transparencies:
• Use transparencies designed specifically for laser
printers. Transparencies must be able to withstand
temperatures of 175°C (347°F) without melting, dis-
coloring or releasing hazardous emissions.
• To prevent print quality problems, avoid getting fin-
gerprints on the transparencies.
• Before loading transparencies, fan the stack to pre-
vent sheets from sticking together.
You can load up to 10 envelopes in the multipurpose
feeder. Try a sample of any envelopes you are considering
using with the printer before buying large quantities. See
page 141 for loading instructions.
When printing on envelopes:
PAPER
• Use envelopes made from 75 to 105 g/m
or
28 lb) bond paper. For best performance and fewer
paper jams, do not use envelopes that:
– Have excessive curl.
– Are stuck together.
– Are damaged in any way.
– Contain windows, holes, perforations, cutouts or
– Use metal clasps, string ties, or metal folding
– Have postage stamps attached.
– Have any exposed adhesive when the flap is in
embossing.
bars.
the sealed or closed position.
Print Material Guidelines
2
(20 to
119