3Com 4500 PWR 26-Port Configuration Manual page 755

To do...
Enable system
information output to the
trap buffer
Configure the output
rules of system
information
Set the format of time
stamp in the output
information
Setting to Output System In
F ollow these steps to set
To do...
Enter system view
Enable the informatio
center
Enable information
output to the log buffer
Configure the output
rules of system
information
Set the format of time
stamp in the output
information
Settin g to Output Syst
Follow these steps to set to output system information to the SNM
To do...
Enter system view
Enable the information
center
Use the command...
info-center trapbuffer [channel
{ channel-number | channel-name }
size buffersize]*
info-center source { modu-name |
default } channel { channel-number
channel-name } [ { log | trap | debug }
{ level severity | state state } ]*
info-center tim estamp { log | trap |
debugging } { boot | date | none }
formation to the Log Buffe
to output system information to the log
Use the command...
system-view
n
info-center enable
info-center logbuffer [ channel
{ channel-number |
channel-name } | size buffersi
info-center source { modu-name |
default } channel
{ channel-number |
channel-name } [ { log | trap |
debug } { level severity | state
state } ]*
info-center timestamp log | trap
| debugging } { boot | date |
none }
em In formation to the SNMP
Use the command...
system-view
info-center enable
59-13
Optional
By default, the switch uses
information channel 3 to o
|
trap information to th
buffer, which can holds up to
256 items by default.
Optional
|
Refer to
def ault output rules of system
info rmation.
Optional
By default, th
format of the output trap
inform ation is date.
r
b uffer:
—
Optional
Enabled by default.
Optional
By defaul t, the switch uses
information channel 4 to output log
information to the log buffer, which
ze ]*
can holds up to 512 items by
default .
Optional
Refer to Table 59-4
output rules of system information.
Optional
{
By default, the time stamp format
of the output log information is
date.
NMS
P NMS:
—
Optional
Enabled by default.
Remarks
utput
e trap
Table 59-4 for the
e time stamp
Remarks
for the default
Remarks