3Com 4500 PWR 26-Port Configuration Manual page 627

N etwork diagram
Figure 50-1 PoE profile a
Network
Eth1/0/1~Eth1/0/5
IP Phone
IP Phone
IP Phone
IP Phone
C onfiguration procedure
# Create Profile 1, and enter PoE profile view.
<SwitchA> system-view
[SwitchA] poe-profile Profile1
# In Profile 1, add the PoE policy configuration applicable to Ethernet 1/0/1 through Ethernet 1/0/5 ports
for users of group A.
[SwitchA-poe-profile-Profile1] poe enable
[SwitchA-poe-profile-Profile1] poe mode signal
[SwitchA-poe-profile-Profile1] poe priority critical
[SwitchA-poe-profile-Profile1] poe max-power 3000
[SwitchA-poe-profile-Profile1] quit
# Display det ailed configuration information for Profile1.
[SwitchA] display poe-profile name Profile1
Poe-profile: Profile1, 3 action
poe enable
poe max-power 3000
poe priority critical
# Create Profile 2, and enter PoE profile view.
[SwitchA] poe-profile Profile2
# In Profile 2, add the PoE policy configuration applicable to Ethernet 1/0/6 through Ethernet 1/0/10
ports for users of group A.
[SwitchA-poe-profile-Profile2] poe enable
pplication
Switch A
Eth1/0/6~Eth1/0/10
AP
AP
AP
AP
50-4