3Com 4500 PWR 26-Port Configuration Manual page 487

Hide thumbs Also See for 4500 PWR 26-Port:
Table of Contents

Advertisement

Figure 40-1 Typical DHCP relay agent application
In the process of dynamic IP
DHCP server interoperate with each other in a similar way as they do without the DHCP relay agent.
The following sections only describe the forwarding process of the DHCP relay agent. For the
interaction process of the packets, see section
1)
After receiving the DHCP-DISCOVER or DHCP-REQUEST broadcast from the client, the network
device providing the DHCP relay agent function unicasts the message to the designated DHCP
server based on the configuration.
2)
The DHCP server selects an IP address and other parameters and sends the configuration
information to the DHCP relay agent that relays the information to the client (the sending mode is
decided by the flag filed in the client'
Format
for details).
Optio
n 82 Support on DHCP Relay Agent
In
troduction to Option 82
Option 82 is the relay agent information option in the DHCP message. It records the location
info
rmation of the DHCP client. With this option, th
implement security control and accounting. The Option 82 supporting server can also use such
info
rmation to define indiv
Option 82 involves at most 255 sub-options. If Option 82
defined. Currently the DHCP relay agent supports two sub-options: sub-option 1 (cir
and sub-option 2 (remote ID sub-option).
Padding content of Option 82
O
ption 82 has no unified definition in RFC 3046. Its padding information varies with vendors. Currently,
S4500 Series Ethernet Switches that operate as DHCP rel
format of Option 82 sub-options. By default, the sub-optio
shown in
Figure 40-2
sub-option 1: Padded with the port index (smaller than the physical port numbe
of the port that received the client's request.
sub-option 2: Padded with the bridge MAC address of the DHCP relay agent devi
the client's request.
address assignment through the DHCP relay agent, the DHCP client and
s DHCP-DISCOVER packet, refer to section
idual assignment policies of IP address and other parameters for the clients.
and
Figure
40-3. (The content in brackets is the fixed value of each fiel
Obtaining IP Addresses
e administrator can locate the DHCP client to further
is defined, at least one sub-option must be
ay agents support the extended padding
ns of Option 82 are padded as follows, as
40-2
Dynamically.
DHCP Packet
cuit ID sub-option)
d.)
r by 1) and VLAN ID
c
e that received

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4500 26-port4500 50-port

Table of Contents